Available Widths:Standard: 14”, 16” or 18", Other widths available - call for more information
- Galvalume: 22ga & 24ga
- Aluminum: .032 & .040
Panel Options:Flat, Striations, Bead Ribs, Pencil Ribs
Slope:Minimum Slope 2:12
- ASTM E1646 Water Infiltration
- ASTM E1680 Air Infiltration
- ASTM E1886 Missile Impact
- TAS 100 Wind Driven Rain
- TAS 125 Wind Uplift
- UL 580 Wind Uplift (Class 90)
- UL 2218 Class 4 Hail Impact
- UL 790 Class A Fire Rating
- UL Environmental – SRI Third-Party Verified
- Miami-Dade County Approved
- Florida Building Code Approved
- Texas Department of Insurance Approval
The JM-2000 is distinctive for its broad width seam, impressive structural capabilities and easy Snap Lock installation. Featuring a 1-3/4″ seam height, the continuous interlocking engineered roof system has a concealed fastener and clip application that allows thermal movement and requires no mechanical seaming to ensure weathertight integrity. The installation is simple and quick, yet it withstands extremley high design pressures and is approved for use on Weather Tightness Warranty projects.
Installation:Can be installed over solid substrate or open framing, Installed over MetShield® underlayment, Installed over synthetic underlayment
Installation DocumentsJM-2000 Plywood – Installation DetailJM-2000 Plywood – Drip Edge wStanding Seam PanelJM-2000 Plywood – Drip Edge wFlush PanelJM-2000 Plywood – Drip Edge PeakJM-2000 Plywood – Eave wStanding Seam PanelJM-2000 Plywood – Eave wFlush PanelJM-2000 Plywood – Valley w DiverterJM-2000 Plywood – ValleywallJM-2000 Plywood – GableJM-2000 Plywood – Gable AlternateCurvedJM-2000 Plywood – HeadwallJM-2000 Plywood – RakewallJM-2000 Plywood – TransitionJM-2000 Plywood – Ridge-HipJM-2000 Plywood – Vented RidgeJM-2000 Plywood – Vented Ridge Corr A VentJM-2000 Plywood – Box Gutter wStanding Seam PanelJM-2000 Plywood – Box Gutter wSoffit PanelJM-2000 Plywood – Box Gutter wFlush PanelJM-2000 Plywood – Valley wo DiverterJM-2000 Plywood – CurbJM-2000 Plywood – Pipe Flashing Detail
Finishes and Warranty Info:
Our aluminum products are painted over prime, made in the USA, aluminum. We use multiple alloys and tempers to ensure that the products supplied will meet and/or exceed your requirements. We are big fans of using our painted aluminum products for coastal applications and have invested a lot of R&D funds to ensure our aluminum roof systems meet and/or exceed the high wind requirements. Our painted aluminum in salt environments does carry a 25-year warranty, however there are annual maintenance requirements.
Drexlume is our version of mill finished Galvalume® with a two-sided, clear acrylic finish that is installed as a unpainted product. The clear acrylic is there to aid with roll forming and will weather away over time (no impact to the performance). Drexlume carries a 25-Year Non Pro-rated Drexlume Warranty (Acrylic Coated Galvalume).
Our steel products are painted over prime, made in the USA, Galvalume, AZ50 and is all Tension Leveled for superior flatness. Galvalume is an aluminum/zinc coated carbon steel product that was designed specifically for building products and contains approximately 80% aluminum in the coating by volume. Galvalume offers much better cut edge protection than traditional hot dipped galvanized products. It carries a 25 year warranty against perforation.
Gold Standard Warranty
The Gold Standard Warranty covers the entire metal roofing system from the roof deck up and is offer exclusively through our network of fabricators and certified installers. Here are the benefits; If our product fails during the warranty period, we will replace your roof at no cost to you and since your metal roof is a sensible investment, if you ever decide to sell your property we will transfer the warranty to the next owner(s) for the life of the warranty. For homeowners, it's important to note that according to Remodeler Magazine you will recoup 85% of your initial investment upon the sale of your property.
Kynar Paint Warranty
35-year paint warranty on Galvalume® and Aluminum substrates. Our paint supplier, Valspar, is a market and innovation leader, therefore our Fluoropon (PVDF Resin also known as Kynar 500® and/or Hylar5000®) coating systems meet all ASTM physical property requirements. Whether its our 1.0 DFT standard 70% Kynar® systems or you need to meet a specification that requires additional film thickness, our support team will be there to help. All standard colors are listed and meet Energy Star’s requirements for steep slope roofing applications. Standard Gloss: 30%